Maritime Discussion: FRESH WATER GENERATOR
  Active Topics  Memberlist  Calendar  Search  Register  Login  
Engineering
 Maritime Discussion :Maritime Knowledgebase :Engineering
Topic: FRESH WATER GENERATOR Post Reply Post New Topic
Author Message
deba prasad saha
Jobships Member
Jobships Member

Location: w.bengal
Posts: 4
Quote deba prasad saha Replybullet Topic: FRESH WATER GENERATOR
    Posted: 28 Sep 2006 at 8:16am
AS DISTILATE WATER PUMP  IN FRESH WATER GENERATOR IS CENTRIFUGAL PUMP ,REQUIRES POSITIVE SUCKTION.HOW IS IT DONE IN FRESH WATER GANERATOR,WHERE WE MAINTAIN VACUUM.
IP IP Logged
Alok Govil
Jobships Member
Jobships Member

Location: Delhi
Posts: 2
Quote Alok Govil Replybullet Posted: 23 Oct 2006 at 6:03am
Distillate pump is usually placed in  a position where the suction has a 'head' - difference in height between condenser lowest point and the pump - this neutralizes the vacuum effect. This is the reason for drop in distillate pump efficiency if the seal is no good.
IP IP Logged
PERI AVADHANI
Jobships Member
Jobships Member

Location: Andhra Pradesh
Posts: 4
Quote PERI AVADHANI Replybullet Posted: 12 Nov 2006 at 10:49pm
Hi,
  Centrifugal pumps are inhrently not self priming, but are able to take suction.  Consider the pumps like ballast, bilge etc which are placed much above the ballast tanks but are able to take suction.
  Here the only problem with the centrifugal pumps is that they are not self priming. SO in FWG the distillate pump is placed below the datum of the condensate  collection level. Hence no problem with priming.
 
IP IP Logged
chandrashekar krishna reddy
Jobships Member
Jobships Member

Location: karnataka
Posts: 2
Quote chandrashekar krishna reddy Replybullet Posted: 10 Dec 2006 at 10:53pm

Hello Mr. Saha,

FWG distillate pump always has some NPSH, since it is placed below the condensate water level. Problem would occur only if there is atmospheric pressure at the eye of the pump and the condensate is under vacuum. But here pressure (ie vacuum inside the shell) is same on condenste and up to pump suction (considering that the seal is in good condition). So, the pressure at the suction side of the pump is more than that of the condensate by an amount equal to its head. hense there is no problem.

IP IP Logged
SRINIVAS ANGA
Jobships Member
Jobships Member

Location: ANDHRA PRADESH
Posts: 1
Quote SRINIVAS ANGA Replybullet Posted: 22 Feb 2007 at 4:44am
IN FWG DISTILLATE PUMP IF THERE  A SMALL LEAK IN MECHANICAL SEAL OR GLAND PACKING IT CAN BE DEALT WITH BY DIRECTING WATER DIRECTLY WHILE STARTING, ONCE PUMP TAKES SUCTION IT CAN RUN QUITE WELL.  
IP IP Logged
bhavik padaria
Jobships Member
Jobships Member

Location: gujarat
Posts: 1
Quote bhavik padaria Replybullet Posted: 13 Apr 2007 at 10:39pm
the centrifugal paump does not require positive suction ..
but if positive suction is provided is it is easy to overcome the force or pressure required to  deliver the  liquid.also the positive suction head  ensures that p/p is always primed ..
 
the vacuum in FWG is in the shell ...
 
the p/p is of the capacity to produce sufficient vacuum in the suction side
 
 
IP IP Logged
Post Reply Post New Topic
Printable version Printable version

Forum Jump
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum



This page was generated in 0.074 seconds.
About Us Advertise Site Map FAQs Feedback Contact Us Refer a Friend